Injector test bench

The test bench consists of two equivalent stations in which all important parameters of a diesel injector are verified using a shot-to-shot measuring unit.
The test specimen is inserted into the device by the operator and the test cycle is then started. The test comprises several measuring points specified in the test plan. These measuring points differ significantly in the system pressure and the control duration of the injector. At each measuring point, the corresponding measurement signals such as system pressure, injection rate, opening and closing time, control pressure, control quantities and much more are recorded, evaluated and stored in a database. At the end of the measurement, a comprehensive good/bad evaluation is carried out and visually displayed to the operator.

Highlights  

  • Ansteuerung des integrierten Shot-to-Shot Messgeräts direkt von der Prüfstands-Software aus.
  • Um eine bestmögliche Anlagenverfügbarkeit zu erreichen, wurden die Stationen abgetrennt. Damit können die Stationen einzeln gewartet werden.
  • Um applikationsnahe Messergebnisse zu erhalten, wurde der Druckerzeuger (Fahrzeugpumpe) des Komplettsystems verwendet. Dieser wird von einem Servomotor angetrieben.
  • Sowohl die Steuerung des Druckerzeugers als auch die Injektoransteuerung wird von der integrierten Fahrzeug ECU realisiert.
  • Durch die Synchronisation von Injektoransteuerung zur Pumpenstellung werden Druckschwankungen während der Einspritzungen minimiert.

Technical data  

  • High pressure supply: 300 – 2200 bar
  • Noise emission: <72 dB
  • Variable injector clamping force: 1 – 9 kN
  • Variable contact force: 1 – 9 kN
  • Control volume pressure: 0.1 – 5 bar
  • Station cycle time: 95 s (with three test points)